Wrought iron
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Miami Homeowners
A gate that won’t open, grinds when it moves, or sits crooked on its hinges isn’t just an inconvenience, it’s a security risk-our Automatic Gate Repair team handles these issues fast. Calder Gate Repair Miami has fixed thousands of gates across Miami since 2009, and we answer our own phones, 24 hours a day. Whether your opener has quit entirely or your driveway gate has started sagging against the track, a background-checked, uniformed technician can be at your door with a written price before any work starts. Call (850) 821-3781 for a free estimate and a live arrival time you can track on your phone.
Driveway Gate Repair
Driveway gate repair in Miami usually means one of three things: an opener that stopped responding, a gate that binds on its track, or hinges and posts that have shifted out of alignment. At Calder Gate Repair Miami, we diagnose the whole system, not just the symptom, because a dead motor often has a mechanical cause behind it. Most driveway gate repairs run $180 to $420 before parts, and we hand you a written price before a single bolt is turned.
Opener and Limit Switch Diagnosis
When a gate stops halfway or reverses for no reason, the limit switch, the small sensor that tells the gate when to stop, is often the culprit. We test it in place, replace it on the spot when needed, and recalibrate travel so the gate closes fully every time.
Track and Roller Realignment
Salt air and Miami’s wet season are hard on steel tracks and rollers. We clean, align, and lubricate the full travel path, replace worn rollers, and correct any Gate Realignment or sag that makes the gate drag or bind.
Styles & brands we work with
Gate Welding
Gate welding repair is about restoring structural steel that has cracked, rusted through, or pulled away at the joints. In Miami, the combination of constant humidity and occasional storm-force wind means welds on older gates eventually fail. Calder Gate Repair Miami performs on-site MIG and TIG welding for gate frames, hinge points, and ornamental pickets, with most repairs running $150 to $400 depending on the extent of the damage.
Crack and Stress Fracture Repairs
Hairline cracks at hinge mounts or mid-rail joints widen quickly once a heavy gate starts flexing. We grind the area clean, weld it solid, and add a gusset where the design allows, so the stress that caused the crack doesn’t just reappear down the line.
Rust-Through Section Replacement
Coral Gables and Coconut Grove properties with older steel gates often show rust-through at the bottom rail, where standing water pools. We cut out the compromised section, weld in matching steel, and treat the repair with corrosion-resistant primer before finishing.
Commercial Gate Repair
Commercial gate repair covers apartment complexes, condo associations, warehouses, and gated business parks across Miami-Dade. These systems run harder, cycle more often, and can’t be offline for long. Calder Gate Repair Miami keeps common opener brands like DoorKing and Elite in service, with commercial repairs typically priced between $250 and $600 before parts, depending on the opener and access control involved.
High-Cycle Opener Service
A commercial gate that cycles 300 times a day needs a different service approach than a residential one. We inspect drive chains, sprockets, and motors for wear, then replace components before they fail during rush hour.
Access System Integration Checks
When a keypad, phone entry unit, or card reader stops triggering the gate, the problem sits somewhere between the access panel and the opener board. We trace the signal path end to end and repair the actual fault instead of swapping parts on a guess.
Iron Gate Repair
Iron gate repair in Miami usually comes down to rust, hinge wear, or bent sections from impact or storms. Iron gates are strong but heavy, and when a Lock Repair needs, hinge pin wear, or when the entire gate drops and starts dragging. Most iron gate repairs at Calder Gate Repair Miami run $175 to $450, depending on whether we’re welding, replacing hardware, or straightening bent components.
Hinge and Post Repair
A sagging iron gate is almost always a hinge problem first. We replace worn pins, weld cracked hinge plates, and reset posts that have shifted, bringing the gate back to level and smooth operation.
Bent Section Straightening
After a car bump or a storm, bent top rails and pushed-in pickets are common on Miami iron gates. We use heat and mechanical pressure to straighten what’s salvageable and weld in new material where it isn’t.
Sliding Gate Repair
Sliding gate repair is what homes and businesses with cantilever or track-style gates need when the gate grinds, jerks, or refuses to move. Miami properties from Doral to Pinecrest use sliding gates because they save driveway space, but they demand clean tracks and properly tensioned chains. Calder Gate Repair Miami handles most sliding gate repairs for $200 to $500 before parts.
Track Cleaning and Debris Clearing
Sand, mulch, and landscape debris pack into sliding gate tracks faster than most owners expect. We clear the full track path, check the guide rollers, and make sure the gate rolls without resistance.
Chain and Motor Tension Adjustment
A loose chain slips and a tight one strains the motor. We set the chain to manufacturer spec and test the opener under load, so the gate doesn’t bind halfway through its travel.
Wrought Iron Gate Repair
Wrought iron gate repair in Miami means bringing a handcrafted gate back to both beauty and function. These gates are often decades old, and their ornamental details make repairs more involved than on plain steel. Most wrought iron gate repairs are quoted between $200 and $500, with written pricing provided before work begins at your Miami property.
Ornamental Pickets and Scrollwork
Decorative scrolls and finials crack at the welds as metal expands and contracts in Miami heat. We repair or replace individual pickets and match the existing pattern, so the gate looks original, not patched.
Surface Prep and Rust Treatment
Surface rust that sits untreated turns into structural rust. We grind, treat, and prime affected areas, then match your finish so the repair blends with the rest of the gate.
Metal Gate Repair
Metal gate repair covers aluminum, steel, and powder-coated gates that have bent, cracked, or started sticking. Aluminum is common in newer Miami communities like Westchester and Palmetto Bay because it resists corrosion, but it’s also softer and prone to dents. Metal gate repairs at Calder Gate Repair Miami typically run $150 to $425 depending on the material and the work required.
Aluminum Dent and Bend Correction
Aluminum dents easily, but with controlled heat and gentle pressure, we can often pull a dented rail back into shape without replacing the entire section. When replacement is the better call, we say so and give you the price up front.
Powder Coat Touch-Up and Protection
After any metal work, exposed steel needs protection from Miami’s salt air. We clean, treat, and touch up the affected area with a matched coating so the repair site doesn’t become the next rust spot.
Wood Gate Repair
Wood gate repair is a different animal from metal work. Miami’s humidity swells wood, the sun dries it out, and the cycle repeats until hinges pull loose and pickets split. Calder Gate Repair Miami replaces rotted rails, tightens or replaces hardware, and re-hangs gates so they swing cleanly, with typical repairs ranging from $150 to $350.
Rot Replacement and Splice Work
Bottom rails and stiles are the first to rot because they wick moisture from the ground. We replace the damaged wood, seal the end grain, and reset the hardware in solid material.
Hardware and Hinge Upgrades
Wood gates fail at the hinge more often than anywhere else. We upgrade to heavier-gauge hardware, reset sagging corners with anti-sag kits, and make sure the gate latches without lifting.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Our technicians train on nine leading gate opener brands, and that includes the names most common in Miami: Ghost Controls, Mighty Mule, DoorKing, and Elite. We’ve serviced hundreds of Ghost Controls and Mighty Mule openers in residential settings, and we’re familiar with the board revisions and motor kits specific to each generation, not just the current models.
DoorKing and Elite units show up all over Miami’s commercial properties, from condo gates in Brickell to industrial lots near the airport. We carry OEM parts for these brands and know the programming sequences that keep access control systems working with the opener. Whether you have one of these brands or any other make, we can diagnose it, quote it, and fix it. Check our Gate Repair in Miami page for more detail on the full opener brands we service.
Signs You Need a Pro Right Now
- Your gate makes a grinding or screeching noise every time it moves. That sound almost always means metal-on-metal contact somewhere: a dry roller, a failing bearing, or a misaligned track. Left alone, the part grinds itself into a more expensive repair.
- The gate stops halfway or reverses for no reason. This points to limit switch failure or an obstruction sensor issue. If the gate doesn’t know where it is, it can’t close securely, and that’s a security gap for your Miami property.
- You have to push or pull the gate to get it started. A healthy opener moves the gate without help. If you’re muscling it, the motor is overworking, and overworking motors burn out faster than they should.
- The gate sags or drags against the ground. Sagging is a hinge or post problem, not an opener problem. The longer it drags, the more damage it does to the track, wheels, and frame.
- The opener runs but the gate doesn’t move. That’s usually a broken chain, a stripped gear, or a clutch that’s slipped. Running the motor while the gate is stuck can damage the opener further.
Our Process, Step by Step
- 1
You call, a live person answers. No voicemail, no bot, no “press 2 for service.” We ask what’s happening with your gate, get your address, and confirm a time that works. You get a trackable arrival window, not a four-hour guess.
- 2
Your technician arrives on time and in uniform. Calder Gate Repair Miami techs are background-checked and carry the parts for common failures on their trucks. They’ll introduce themselves, look at the gate, and listen to what you’ve noticed.
- 3
You get a written price before any work starts. The technician diagnoses the problem, explains what they found in plain language, and hands you a written quote. The number on the invoice at the end is the number you agreed to at the start.
- 4
We fix it and test it under real conditions. The repair gets tested through multiple open and close cycles, under load where applicable, with the safety sensors and limit settings verified. You’ll get before-and-after photos and a digital invoice you can pay from a link.
- 5
The 365-Day Done Right Promise kicks in. If the repair fails within 365 days, Calder Gate Repair Miami returns at no charge to make it right. That’s written on every job, not hidden in the fine print.
How Much Does Gate Repair Cost in Miami?
A typical gate repair in Miami runs $150 to $500, depending on what’s actually wrong. Opener issues on brands like Ghost Controls or Mighty Mule often land between $180 and $320 before parts, while structural repairs like welding or hinge replacement on a heavy iron gate trend toward $300 to $600. The biggest cost drivers are gate weight, damage extent, and whether we need to source a specific OEM board or motor. A straightforward limit switch replacement is quick and affordable. A rusted-through bottom rail that needs cutting, welding, and refinishing is a different job.
How do you avoid overpaying? First, insist on a written price before any work starts. We do this automatically, every job, no exceptions. Second, don’t ignore small symptoms like noise or hesitation, they turn into bigger, pricier failures. Third, ask what’s included: our free estimates cover the diagnosis and the written quote, so you can make a decision without paying for the visit. Call (850) 821-3781 for a no-obligation estimate from Calder Gate Repair Miami.
Our Service Area Near Miami
Calder Gate Repair Miami covers the city and the surrounding communities, including Gate Repair in Miami Beach, Gate Repair in Kendall, Doral, Palmetto Bay, Pinecrest, Sweetwater, Westchester, Key Biscayne, Miami Shores, Surfside, and Brownsville. We schedule by actual drive time, so most Miami appointments get a same-day or next-day arrival window that we hit.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Miami
Gate repair is the process of diagnosing and fixing mechanical, electrical, or structural problems that keep a driveway or commercial gate from opening, closing, or staying secure. It includes work on openers, hinges, tracks, rollers, welds, and access control systems. In Miami, the most common calls we get are for opener failures, rusted or sagging hinges, and gates that bind on their tracks.
Most residential gate repairs are completed in 60 to 90 minutes on site. Structural work like welding or wood rot replacement can take two to three hours. We’ll tell you the expected time before we start, and you’ll have a trackable arrival window when you book so you’re not waiting around all day.
Gate repairs in Miami typically cost between $150 and $600 depending on what’s wrong and the gate’s size and material. Simple opener fixes run on the lower end, structural steel repair runs higher. Every Calder Gate Repair Miami quote is written and agreed to before work starts, so the final invoice never surprises you.
Yes, we service all four of those brands, plus LiftMaster, FAAC, BFT, Linear, and Viking. Our techs train on nine major opener brands and carry OEM parts for the most common repairs. If you’re not sure what brand you have, the technician can identify it in minutes.
Yes, Calder Gate Repair Miami answers calls 24 hours a day, 7 days a week, with a live person on the line. Gates that won’t close are a security issue, and we prioritize those calls. Tell us what’s happening and we’ll get you a trackable arrival time, not a vague promise.
Every repair carries the 365-Day Done Right Promise. If the repair fails within 365 days, Calder returns at no charge to make it right. That’s a written guarantee on every job, plus a free second visit if the initial repair doesn’t hold.
Clear the area around the gate so the technician can work safely. If possible, note whether the problem happens all the time or only at certain times of day. A short video of the gate misbehaving on your phone is genuinely helpful. You don’t need to move vehicles or disconnect anything, we’ll handle the rest.
Schedule Your Gate Repair Service in Miami Today
Your gate should open when you pull up and close securely behind you. When it doesn’t, Calder Gate Repair Miami is one call away. Reach a live person at (850) 821-3781 any time, day or night, and get a free estimate with a written price before any work begins. We show up on time, fix it right, and back it with the 365-Day Done Right Promise.
Written by Nico Alvarez, Owner at Calder Gate Repair Miami, serving Miami since 2009.