Wrought iron
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunset
A gate that won’t open, drags across your pavers, or sits dead after a storm isn’t something you can put off. It’s your daily entry and exit, and in Sunset it’s also the first thing anyone sees from the street. Calder Gate Repair Miami sends factory-trained techs to Sunset homes every week, usually with the parts on the truck to fix the problem in one visit. We answer calls live around the clock, give you a written price before any work starts, and every repair carries our 365-Day Done Right Promise: if it fails within a year, we come back free. Call us at (850) 821-3781 and you’ll get a real person, not a menu.
Why Calder Gate Repair Miami Is Sunset’s Preferred Gate Repair Company
Sunset homeowners don’t want a rotating cast of strangers showing up with a vague four-hour window. Our techs are background-checked, uniformed, and dispatched with a live arrival time you can track on your phone. When we say someone will be at your home off Southwest 72nd Street at 1:30, that’s when the van pulls up. Every quote is written, every price agreed before a single bolt comes off, and every invoice is digital, sent to your phone.
Nico Alvarez runs the Sunset service area for Calder Gate Repair Miami, and he’s the one who makes sure the 365-Day Done Right Promise means something on the ground. If a hinge repair fails, a circuit board dies again, or a gate sags back out of alignment within a year, Calder returns at no charge. That’s the Relay Visibility Guarantee: you know who’s coming, when they’ll arrive, and exactly what it costs.
Styles & brands we work with
Wrought Iron Gate Repair in Sunset
Wrought Iron Gate Repair is our most common call in Sunset, where original 1990s swing gates still stand in front of hundreds of homes north of Sunset Drive. The iron itself is usually salvageable; the problems are the post footings, hinge wear, and rust that accelerate in this climate. Most wrought iron gate repairs in Sunset run $210 – $460, depending on whether we’re re-welding a hinge, straightening a sagging leaf, or resetting a post that’s shifted in saturated soil. You’ll know the number before we start.
Hinge And Post Refits After Ground Saturation
Saturated ground after heavy rain lets the hinge post lean. The gate’s top hinge carries extra load, and over time the leaf drops just enough to scrape the driveway. We reset the footing, true the post, and re-hang the gate so it swings free. If the rack and pinion stripped during the drag, we replace that section while we’re in there.
Rust And Weld Repair For Coastal Air
Sunset’s humidity and salt-laden wind get into every scratch and seam. We grind back surface rust, treat the metal, and re-weld cracks before they spread. A day spent patching and repainting today saves a replacement in two years.
Metal Gate Repair in Sunset
Metal Gate Repair covers the broad middle of what we do in Sunset: aluminum driveway gates, steel-framed walk gates, and the full perimeter setup around half-acre lots off Kendall Drive. Aluminum doesn’t rust like iron, but it corrodes differently at the welds, and heat expansion in direct sun can bind a gate that fit fine in January. Typical metal gate repairs in Sunset run $180 – $410, and most jobs are done the same day we arrive.
Aluminum Frame Straightening And Track Repair
Aluminum gates take a beating from afternoon storms and daily cycles. When the frame twists or a wheel pops off the track, we straighten what’s salvageable and replace what isn’t. We carry track, wheels, and bracket hardware for the common gate styles in Sunset’s 1970s-through-early-2000s homes.
Perimeter Wall Jobs And Oversized Lots
Many Sunset homes on quarter-acre and half-acre lots have long driveway runs with gates at the street and a second access near the back. Long runs put extra leverage on the top hinge, which is exactly where we find sag and drag patterns. We check the full swing arc, not just the latch side, so the gate closes square every time.
Trusted Brands We Service in Sunset
We’re factory-familiar with the operators Sunset homeowners actually have on their gates: LiftMaster, FAAC, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Ghost Controls board fails after a lightning strike or an old DoorKing won’t close on the loop detector, our techs carry the right diagnostic tools and the most common replacement parts for this market. For Sunset, that means we stock weatherproof enclosures, photocells, and low-voltage cabling rated for UV exposure, because those are the items that fail here first.
Common Gate Repair Problems We See in Sunset Homes
- Storm-saturated post footings: After sustained rain, the soil around hinge posts softens and the gate leans. The leaf drags on the driveway and the opener fights the swing. This is the number one storm-season issue in Sunset’s original 1990s installations.
- Corroded circuit boards from humidity and salt air: Older LiftMaster and FAAC operators mounted without sealed enclosures fail from moisture ingress. Intermittent operation, blown fuses, and dead keypads all trace back to this.
- UV-embrittled low-voltage wiring: The insulation on keypad and photocell wiring cracks after years of direct sun, then shorts during afternoon cloudbursts. The gate works fine in dry weather and erratically during rain.
- Wind-damaged racks and misaligned safety photocells: Hurricane-force gusts push gates past their normal travel, bending rack sections and knocking photo-eyes out of alignment. A gate that rattles and shakes at the end of travel is often a rack issue.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Sunset, FL
We Also Serve Cities Near Sunset
Our Gate Repair team regularly handles jobs in Miami, Miami Beach, Kendall, and Doral. If you’re just outside Sunset, call and ask; we likely cover your street and can get someone out quickly.
Serving Sunset, FL - Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunset
How do I manually release my swing gate operator during a power outage in Sunset after a hurricane?
Locate the manual release handle on your operator, usually a small lever or pull chain on the side of the motor housing. Pull it to disengage the motor from the drive arm, then push the gate open or closed by hand. Don’t force a gate that’s dragging on the ground; call us at (850) 821-3781 and we’ll get it squared away.
Why does my wrought iron gate drag only after heavy rain in Sunset?
When heavy rain saturates the soil, the hinge post shifts slightly and the gate leaf drops. In Sunset, many original 1990s posts were set without enough concrete for today’s heavier solid infill designs, so the post leans and the gate scrapes the driveway. The fix is resetting the post footprint with proper concrete and re-hanging the gate.
Can a solar gate opener survive Sunset’s rainy season?
Yes, if the panel and battery are sized for cloudy-day operation. The issue in Sunset’s rainy season is sustained cloud cover; an undersized panel won’t recharge the battery. Our techs test charging voltage, battery capacity, and panel orientation during every solar opener service call, and we recommend sealed battery boxes and marine-grade connectors for this climate.
My slide gate makes a grinding noise and shakes when it reaches the end – what should I check?
Check whether the rack is aligned with the drive gear and whether any teeth are missing or bent. In Sunset, wind gusts and storm debris often push slide gates past their intended travel, bending rack sections. A grinding noise at the end of travel is usually a stripped or misaligned rack. This isn’t a DIY fix; it needs a tech to re-align the gate and replace damaged rack sections.
Are automatic gates in Sunset required to have photo-eyes?
Yes. Automatic gates in Florida must meet UL 325 safety standards, which require photo-eyes or an equivalent entrapment protection device. If your gate’s photo-eyes aren’t working, the gate should not be operated automatically. Our techs check, clean, and re-align photo-eyes on every service call.
Call Calder Gate Repair Miami for Gate Repair in Sunset
When your gate isn’t right, call (850) 821-3781. We’ll put a written price in your hands before any work begins, show up when we say we will, and stand behind the repair for a full year. Nico Alvarez and the Sunset service team are ready to get your gate swinging again.
Written by Nico Alvarez, Owner at Calder Gate Repair Miami.