Wrought iron
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Opener Repair Across Sunset
A gate opener that won’t open in Sunset is usually one of three things: a dead solar battery after afternoon storms, a wind-twisted hinge that’s tripping the safety sensor, or a 1990s operator that’s simply reached the end of its life. Calder Gate Repair Miami fixes all three, and we give you a written price before any work starts. Call us at (850) 821-3781 for a free estimate, and a background-checked technician will head to your Sunset home with a live arrival time you can track from your phone.
Why Calder Gate Repair Miami Is Sunset’s Preferred Gate Opener Repair Company
We know Sunset’s gates because we work on them constantly. The combination of quarter-acre to half-acre lots, wrought iron and aluminum driveway gates, and original builder-grade operators from the 1990s means most repair calls here involve machinery that’s older than the cars parked behind it. Our Gate Opener Repair team carries parts for the brands Sunset homeowners actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Nico Alvarez leads our techs, and he checks every job personally before it closes. No vague four-hour windows, no surprise invoices. You get a trackable arrival time, a written guarantee on the work, and a digital invoice you pay from a link. If a repair fails within 365 days, Calder returns at no charge. That’s the 365-Day Done Right Promise, in writing, on every job.
Sunset homeowners also tell us they appreciate that a real person answers the phone at 3 a.m. when a gate won’t close during a storm. That’s standard for us, 24/7.
Styles & brands we work with
Gate Opener With Keypad in Sunset
Gate Opener With Keypad service in Sunset covers the control board, the keypad itself, and the wiring between them. Most Sunny homeowners add a keypad when a builder-grade opener from the 90s was never paired with one, or when the existing keypad has gone intermittent – and in Sunset, intermittent often means water. A new keypad install with programming typically runs $180 to $320. Replacing a corroded keypad control board runs $220 to $450 depending on the brand. If your keypad is dead after rain, the fix is rarely the keypad itself; it’s almost always the board behind it.
Keypad programming and weatherproofing
Sunset’s humidity attacks exposed keypad wiring. We seal every connection and use weatherproof housings rated for outdoor Florida exposure. We also reprogram entry codes while we’re on site, so you don’t pay for a second visit.
Keypads for existing openers
If your older FAAC or Mighty Mule opener never had a keypad, we can usually add one. Ghost Controls and DoorKing openers have straightforward retrofit paths. We’ll confirm compatibility by the model number before quoting anything.
Gate Operator in Sunset
Gate Operator replacement or repair in Sunset means the motor, gearbox, and circuit board that do the actual opening work. The operators in Sunset’s 1970s-through-early-2000s homes are frequently original equipment, and when a 30-year-old FAAC gives out, rebuilding it often costs more than a new operator. A full gate operator replacement in Sunset runs $850 to $1,600 before parts. Repairing an existing operator – limit switches, capacitors, control boards – runs $200 to $500 depending on what failed. We quote the exact figure before ordering anything.
Repair vs. replace on older operators
A 1990s operator that still runs but sounds like a coffee grinder may only need a gear or limit switch. We’ll tell you plainly if the repair buys you five more years or five more months. No pressure, just numbers on paper.
New operator installation
When a new operator is the right call, we schedule a measure, spec the correct model for your gate’s weight and wind load, and give you a written price that includes parts, labor, and haul-away of the old unit. No same-day rush installs on new operators; this is measured, ordered, and scheduled work.
Trusted Brands We Service in Sunset
We’re factory-familiar with nine major gate opener brands, and the ones we see most in Sunset are LiftMaster, FAAC, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for these in our South Florida service vehicle fleet, which means many Sunset repairs are completed the same day. For a solar opener that’s draining its battery after every afternoon cloudburst, or a 1990s swing gate that’s sagging into its own track, we know the failure mode before we arrive.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Opener Repair Problems We See in Sunset Homes
- Solar opener batteries that fail to recharge after afternoon cloudbursts. In the neighborhoods north of Sunset Drive, solar retrofits are common on oversized lots. When heavy rain clouds block the panels for days at a time, the low-voltage charging circuit never catches up, and gates go dead by evening.
- Wind-twisted solid infill gates that trip safety sensors. Hurricane-season gusts push against solid-panel gates and rack the hinge alignment. The gate closes unevenly, catches the safety photocell, and reverses. Usual fix: reset hinges, straighten the rack, retune the opener’s force limits.
- Post footings shifting in saturated sandy soil. Sunset’s sandy ground drains fast but loses bearing strength when soaked. Wind pressure on a wide gate torques the post in its footing, pulling the gate out of alignment. Sag correction is a recurring repair here, not a one-time fix.
- Corroded circuit boards and terminal blocks. Salt air combined with high humidity penetrates control board enclosures, especially on older operators without sealed gaskets. Corrosion on terminals leads to intermittent keypad operation and dead remotes.
Pricing for Gate Opener Repair in Sunset, FL
Here are honest ranges for what Sunset homeowners pay. A service call and diagnosis costs $85 to $125. Basic repairs like limit switch replacement or sensor realignment run $180 to $340. Control board replacement runs $220 to $450. A full operator replacement with parts and labor runs $850 to $1,600 depending on gate size and brand. Solar opener battery and charger issues run $120 to $300. Every price is written down and agreed to before work begins; the number on the invoice is never a surprise. Call (850) 821-3781 for a free estimate specific to your gate.
We Also Serve Cities Near Sunset
Our Gate Opener Repair in Sunset service area extends to Miami, Miami Beach, Kendall, and Doral. If you’re just outside Sunset, we’ll still dispatch a tech and keep everything else the same: written price first, live arrival time, and a free second visit if the repair fails within 365 days.
Serving Sunset, FL - Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Sunset
Sunset’s afternoon cloudbursts block the solar panel for days at a stretch, and the low-voltage battery never reaches a full charge. Over time the battery sulfates and holds less capacity, so the gate works after a sunny morning and dies by evening. The fix is usually a charging-circuit test plus battery replacement, around $120 to $300. Call (850) 821-3781 and we’ll check the panel output, charge controller, and battery health in one visit.
Locate the manual release lever on your operator, usually a red or yellow handle on the motor housing. With the gate in a closed position, pull the lever to disengage the motor’s gear, then move the gate by hand. Do not attempt to force the gate while the motor is still engaged – you’ll strip the gear. When power returns, re-engage the operator and test its travel. If storms in Sunset have left your operator jammed or unresponsive, call us; opening a storm-damaged gate incorrectly can cause serious injury. We’ll come out and get it secured properly.
You can reduce, not eliminate, wind damage. The most effective prevention for solid infill gates is adding or replacing a wind-rated hinge set and then reprogramming the opener’s force limits so it doesn’t fight itself. Some Sunset homeowners also cut openings into solid panels to reduce wind pressure, which slows wind damage noticeably. We can assess your gate’s wind load during a regular service call and tell you what is worth doing and what isn’t.
Water is getting into the keypad’s wiring or the control board’s terminal strip, and in Sunset’s humidity this turns into corrosion fast. The keypad sends a signal, but the corroded connection reads it sporadically. We see this frequently in north Sunset Drive neighborhoods where 1990s operators sit in original enclosures without sealed gaskets. The fix, usually $180 to $320, is replacing the corroded section and sealing the connections.
Not necessarily. If the motor runs, the gear is sound, and the limit switch still works, rebuilding the worn parts may buy years more – often $200 to $500. But if the control board is corroded beyond repair or the gearbox is binding, a new operator at $850 to $1,600 is the smarter call. We’ll quote both paths in writing and you decide. Call (850) 821-3781 for an assessment.
Written by Nico Alvarez, Owner at Calder Gate Repair Miami, serving Sunset and surrounding South Florida communities.