Wrought iron
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Kendall, FL | Calder Gate Repair Miami
We’re Calder Gate Repair Miami, and we provide independent Mighty Mule Gate Repair - Kendall across the area. Most Mighty Mule openers in this area fail from salt-air corrosion, lightning surges, or heat-drifting limit switches, not old age. That’s the difference between a tech who fixes gates and a tech who knows Kendall. If your Mighty Mule gate won’t open, beeps constantly, or stalls halfway, call (850) 821-3781 and we’ll send a background-checked tech with a live arrival time.
Why Kendall Residents Choose Us for Mighty Mule Service
Nico Alvarez, our owner and lead technician, cut his teeth at Los Angeles Trade-Technical College and spent years on gate systems across Southern California before bringing that experience to Miami full-time. He’s worked on every Mighty Mule model line in circulation, and he’s built our crew to diagnose problems on the first visit, not schedule a second trip to sell you more parts. When we roll up to a Kendall property, we already know what this climate does to Mighty Mule hardware. We stock common OEM boards, transformers, and remotes for same-day fixes. When OEM parts are backordered or discontinued, we use aftermarket equivalents sized to the same voltage and torque specs, and we tell you honestly if a rusted arm or water-damaged board means a new opener instead of a patch job. Our techs arrive in uniform, and every repair carries the 365-Day Done Right Promise: if the fix fails within a year, we come back free.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in Kendall
- Corroded battery terminals in MM371W backup trays. Kendall’s humid, salty air eats at the terminals in the backup battery tray, which causes intermittent low-battery beeps and total failure to open during outages. We clean and replace the corroded contacts, then test the battery under load so you’re not stranded when the power drops.
- Lightning-strike surges blowing FM500 control boards. Kendall sits in the lightning capital of the U.S., and afternoon thunderstorms routinely send surges through the low-voltage side of FM500 slide operators. The transformer gets scorched, the board throws an over-voltage fault, and your gate goes dead even if the opener looks fine from outside.
- Limit switch drift on MM372W swing arms. High heat and UV exposure cause the limit switches on MM372W swing arms to drift over time. Your gate stops a few inches short of fully open, then reverses unexpectedly. This isn’t a motor failure. It’s a calibration and switch adjustment issue.
- Rust-jacked hinge posts on older RB741 installations. On many Kendall properties, the original zinc-plated hardware on RB741 gates has corroded against aluminum gate frames in the salty air. The hinges bind, the gate strains the motor, and eventually something gives. We replace the hardware with stainless or powder-coated alternatives.
- FM502 slide gate realignment after storms. High winds and saturated ground shift gate posts and track alignment. An FM502 that worked fine in March starts grinding or stalling by July. We realign the track, adjust the photo eyes, and recalibrate travel limits so the gate runs smooth again.
Mighty Mule Service in Kendall: What Local Conditions Mean for Your Equipment
Here’s something most people don’t realize: Kendall sits outside the coastal evacuation zone but squarely inside the most lightning-prone region in the United States. That means our Electric Gate Repair in Kendall disproportionately involves surge-damaged control boards and reset transformer failures after afternoon storms. It’s not just salt-air hinge rust, which is what dominates in coastal cities like Miami Beach. In Kendall, when a thunderstorm rolls through at 4 p.m., we know we’ll get calls about FM500s that died an hour later. At a house in Country Walk, our tech found an FM500 slide operator that had been dead for two days after a storm. The original transformer was scorched, the control board showed an over-voltage fault, and the homeowner had been manually dragging the gate open every morning. We installed a marine-grade surge protector ahead of the opener, replaced the transformer with an OEM-spec unit, rewired the photo-eye power taps, and ran a full travel calibration so the gate wouldn’t slam into the end stop. If you live anywhere near the Falls or Country Walk, a surge protector isn’t optional for your Mighty Mule. It’s the difference between a $40 part and a $300 board replacement.
Mighty Mule Models & Products We Service in Kendall
We work on every Mighty Mule line you’re likely to own in Kendall. The MM371W and MM372W swing arm openers, the FM500 and FM502 slide operators, the MM562 and MM572 heavy-duty swing arms, and the older RB741 and RB742 models still installed on plenty of 1980s-era Kendall properties. For battery backup systems, we service the MM-BT series trays and can retrofit older openers with a backup so your gate works during hurricane-season outages. On parts, we’re straight with you: we stock OEM boards, transformers, and remotes for fast turnaround, but if a board is discontinued we source quality aftermarket equivalents with matching voltage and torque specs. And if your rusted arm or water-logged board means repair doesn’t make financial sense, we’ll say so and quote you a new opener instead of patching a problem that’ll fail again in six months.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Kendall
Most Mighty Mule gate opener repairs in Kendall run $180 to $340 before parts. A typical control board replacement lands between $300 and $600 installed, depending on the model. Limit switch adjustments are on the lower end. Full opener replacements start around $850 and go up depending on gate size and whether you need a new arm, track, or battery backup. The written estimate we send covers everything: the diagnosis, the parts, the labor, and any disposal. No number changes at the door. For an exact quote on your Mighty Mule, call (850) 821-3781. Estimates are free, and we’ll put the price in writing before anything moves.
Serving Kendall, FL - Our Local Coverage Area
We’re based in the Kendall area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Kendall
The backup battery tray’s terminals are likely corroded from Kendall’s salty, humid air. Water vapor gets into the tray, the terminals oxidize, and the board’s low-voltage sensor reads it as a failing battery. We clean the corrosion, replace terminals if they’re shot, and load-test the battery before calling it fixed. If it’s still beeping after we leave, the 365-Day Done Right Promise covers a return visit at no charge. Call (850) 821-3781 to schedule a check.
Yes. A surge can fry the transformer and control board while leaving the motor intact, so the gate moves manually but the opener won’t respond. You’ll see no LED lights, no beeps, no movement from the remote. That’s a textbook surge failure, and it’s the most common storm-related Mighty Mule repair we see in Kendall. Call (850) 821-3781 for a diagnosis; we’ll quote the transformer or board replacement in writing before we start.
Probably not. What you’re describing is limit switch drift, which happens when heat and UV exposure cause the open-limit sensor on your MM372W to read the gate as fully open before it actually is. The gate stops a few inches short, then reverses as a safety measure. We recalibrate the limits and adjust the switch, and the gate runs full travel again. You can reach us at (850) 821-3781 for a free estimate.
Yes. We cut out the rusted section, weld in new steel or stainless stock, and powder-coat the repair to match. On Kendall gates, where salt air and Everglades moisture accelerate corrosion, we often recommend replacing standard zinc-plated hinge hardware with stainless or powder-coated alternatives so the same problem doesn’t come back next year. The repair usually takes half a day, and we quote it in writing before cutting anything. Call (850) 821-3781 for an estimate.
Yes. Kendall sits outside the coastal evacuation zone, which means people stay through storms. When the power fails, a battery backup keeps your gate operational so you can get vehicles in and out. For older MM371W or RB741 openers, we can retrofit a backup system with a marine-grade battery tray that resists the salt-air corrosion this area is known for. The installed cost is usually $350 to $550. Call (850) 821-3781 and we’ll tell you exactly what your model needs.
Service Areas Near Kendall
We cover Kendall and the surrounding communities, including Pinecrest, Palmetto Bay, Doral, and the Falls. If your Mighty Mule opener is acting up and you’re just outside Kendall, we likely still have a truck nearby. For coastal neighbors, we also offer Mighty Mule service in Miami and Mighty Mule service in Miami Beach. And if you’re looking for a broader look at the brand, see our Mighty Mule sales & service page or our full Kendall service area coverage.
Book Your Mighty Mule Service in Kendall Today
Call (850) 821-3781 and a live person answers, 24 hours a day, seven days a week. We’ll book a tech for your Kendall property, send a trackable arrival time, and put the price in writing before anything moves. Nico and the crew are ready to get your Mighty Mule gate working again today.
Written by Nico Alvarez, Owner at Calder Gate Repair Miami, serving Kendall since 2009.