Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Miami Owner’s Guide

Ghost Controls keypad and intercom repair in Miami typically runs $145 – $360 installed, depending on whether we’re swapping a keypad, replacing a failing intercom board, or rewiring corroded connections. We stock Ghost Controls-compatible keypads and intercom parts on the truck, so most repairs happen same day. The way most Miami owners discover the failure: the gate works fine from the remote inside the car, but the keypad outside either won’t accept the code, goes completely dead, or the intercom audio crackles and cuts out.

Call (850) 821-3781

If you’re standing at your gate right now punching your code in for the third time with no movement, that’s the part we fix. Nico Alvarez and the crew at Calder Gate Repair Miami handle Ghost Controls keypad and intercom failures every week, from Coconut Grove to Kendall to neighborhoods up around Hialeah. We’re an independent service provider, not affiliated with Ghost Controls, which means we tell you straight whether an OEM part or a quality aftermarket equivalent makes more sense for your gate.

Which Ghost Controls Models This Applies To

Ghost Controls makes two main keypad styles: the standard wired keypad (sometimes called the AXDP keypad) and the wireless keypad used on the TSS1 and TDS2 series openers. Intercoms are less common from Ghost Controls directly, but we service aftermarket intercoms paired with Ghost Controls boards, which is where most of the confusion starts.

The compatibility gotcha most Miami owners run into: the wired Ghost Controls keypad uses a specific 4-wire connection with its own color code, and it does not play nice with universal keypads from LiftMaster or Mighty Mule. If you buy a universal keypad off a shelf thinking it’ll wire in, it won’t. The Ghost Controls board reads the keypad’s pulse per digit differently. We also carry quality aftermarket equivalents that work with Ghost Controls wiring, and in most cases they hold up better against Miami humidity than the original, because they use fully sealed membrane faces instead of exposed button contacts.

To identify your exact part, open the keypad housing and look for the model sticker on the back of the board, usually a small white label with a “TDS” or “AX” prefix. Send us a photo of it when you call, and we’ll tell you before we dispatch whether we have the direct replacement on the truck.

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

• Keypad lights up but gate doesn’t move. The keypad is sending a signal, but the control board isn’t receiving or accepting it. This usually points to a burned relay on the Ghost Controls board, not the keypad itself. We test both before quoting.
• Code works sometimes, not others. Intermittent keypad response in Miami is almost always moisture inside the housing or a loose ribbon connector. The humidity plus afternoon thunderstorms work their way into the tiniest gaps.
• Buttons need to be pressed hard or multiple times. The membrane contacts wear out from repeated use over 3 to 5 years. Once the tactile feel goes, the part is on borrowed time, and a replacement keypad is usually cheaper than trying to rebuild the old one.
• Intercom audio is faint, crackly, or one-sided. On Miami properties with gates 50+ feet from the house, long intercom wire runs are vulnerable to corrosion at the splice points and moisture intrusion in the outdoor speaker. Sometimes it’s just a wiring issue; sometimes the intercom board itself is done.
• Ghost keypad is completely dead, no lights. Before replacing anything, we check if the unit is receiving power at the wire terminals. Dead keypads on Ghost Controls systems are often a tripped transformer or a nick in the low-voltage line from a weed trimmer, and repairing that wire is a much smaller job than swapping the keypad.

Replacement Cost & What’s Included

These are installed, drive-to-your-driveway prices for Miami and the surrounding area. We tell you the exact number before any work begins, and the price is in writing, not a handshake. The range exists because a standard keypad swap is quick, while a system where the wire itself is degraded or the board has taken a surge needs additional diagnostics. You’ll know the real number before the first screw comes off the housing.

Every repair carries a written guarantee through our 365-Day Done Right Promise. If the part we installed fails within 365 days, we return and fix it at no charge. No phone tag, no “we’ll see.” That’s the standard at Calder Gate Repair Miami.

DIY or Call Us?

There’s one safe thing you can check yourself: the keypad battery or the breaker. If you have a wireless Ghost Controls keypad, pop the battery cover and check for corrosion on the terminals. That’s it. These are low-voltage parts, so the electrical risk is modest, but the moment you start opening the keypad housing or touching wires at the control board, you risk shorting the Ghost Controls board, and a $200 keypad repair becomes a $500 board replacement. The wiring is low-voltage, but the board itself is not something to probe blind. Miami’s wet season also means faulty seals and sun-baked plastic are common failure points, and resealing a keypad properly takes experience, not YouTube confidence.

If you’d rather have it diagnosed and done right the first time, call us at (850) 821-3781. We’ll tell you over the phone what we think it is and what it’ll cost before we roll the truck.

FAQs