FAAC Electric Gate Repair Nationwide

FAAC Electric Gate Repair in Miami: What to Know First

FAAC electric gate repair in Miami typically runs $185 – $425 for most opener and control board issues, with same-day or next-day dispatch available across the city. We’re an independent FAAC service provider, not a manufacturer affiliate, which means we fix what’s broken rather than steering you toward a system replacement you don’t need. Most FAAC repairs take 1 – 2 hours on site once we’re at the gate.

Call (850) 821-3781

If you’re reading this because your FAAC gate buzzed, stopped mid-swing, or now only opens when you punch the manual release button, you’re in the right place. Calder Gate Repair Miami works on FAAC 412, 400, C720, C721, 750, 760, and E024S models daily. Call (850) 821-3781 and a live person answers, 24/7. We’ll give you a written price before anything moves.

How FAAC Products Fail – and How We Fix Them

FAAC builds solid operators. But Miami’s salt air, humidity, and afternoon lightning storms create a specific failure profile we’ve come to recognize fast. Here’s what we see most across the city:

• Control board failures on the 412 and C720 series – The FAAC 412’s control board sits in a housing that traps moisture in humid climates. When a Miami afternoon storm rolls through and the sun hits the box right after, condensation forms inside. The board shorts. Symptom: the gate beeps but won’t move, or the indicator LEDs flicker erratically. Fix: we test voltage at the board, confirm the failure in writing, and replace with OEM or an equal-quality aftermarket board, depending on what you want and what’s available.
• Limit switch drift on FAAC 750 and 760 hydraulic operators – These powerful swing operators use limit switches (the small sensors that tell the gate exactly where to stop). Miami’s heat causes the internal cams to expand microscopically, which throws off the stop point over time. The gate starts slamming against the post or stopping two feet short of closed. Fix: we recalibrate or replace the limit switch assembly and set the deceleration points so the gate doesn’t hammer the post.
• Capacitor burnout on FAAC 400 series motors – The 400’s start capacitor sits next to the motor and absorbs heat all day. After enough Miami summers, it swells and pops. Symptom: the motor hums but nothing moves. This is the one FAAC issue where the symptom can mislead you into thinking the motor itself is cooked. Fix: we test the capacitor with a meter, confirm it’s dead, and replace it. A $40 part instead of a $600 motor. We show you the failed part on the truck before we install the new one.
• Photocell misalignment on FAAC sliding gate systems – FAAC photocells (the safety sensors that stop the gate if something’s in the way) are sensitive to heat and vibration. In Miami, concrete driveway slabs shift slightly with temperature changes, and a sensor that was perfectly aligned in January points half an inch off by August. Gate reverses for no reason. Fix: re-align, verify the beam with our test tool, and mark the final positions so you can reference them later.
• Remote receiver failure on older FAAC E024S units – The E024S was installed across Miami residential communities for years. Its receiver board eventually fails, causing remotes to work only at very close range, then not at all. Fix: we bench-test the receiver, confirm the fault, and install a compatible replacement receiver while keeping your existing remotes programmed. No need to buy all-new remotes unless you want to.

Our FAAC Electric Gate Repair Process

Every FAAC job we run follows the same sequence, whether it’s a Brickell condo gate or a swing gate on a Coral Gables estate.

1. 1
   You call, a person answers. No phone tree. We ask what the gate is doing, what model you have, and what neighborhood you’re in. We give you a live arrival window you can track.
2. 2
   Diagnosis on site. Our tech checks the control board, wiring, sensors, and motor. We test, we don’t guess. Most FAAC problems get identified on the first visit because we’ve seen the common failure patterns hundreds of times.
3. 3
   Written price before work starts. We show you the exact number, parts and labor separated, and explain what’s wrong in plain English. Price in writing before anything moves, that’s just how it should work.
4. 4
   Parts decision. We explain the tradeoff between OEM FAAC parts and quality aftermarket equivalents. OEM keeps your warranty clean if the unit’s under coverage. Aftermarket often saves 40 – 60% on older systems. You decide, with our recommendation.
5. 5
   The repair and the test. We fix the problem, then cycle the gate 10 – 15 times, test every safety sensor, and check the manual release. We take before-and-after photos and send them to you with the digital invoice.
6. 6
   365-Day Done Right Promise. Every FAAC repair carries our written guarantee. If it fails within 365 days, we return at no charge. That’s not a verbal promise. It’s on the invoice.

What FAAC Electric Gate Repair Costs in Miami

Here’s what Miami homeowners can expect to pay for the FAAC repairs we handle most often. These are real ranges, not marketing numbers.

• Capacitor replacement: $145 – $195, including the part and labor.
• Limit switch adjustment or replacement: $165 – $245.
• Photocell realignment or replacement: $125 – $220 per sensor.
• Remote receiver replacement: $185 – $310, depending on the receiver model and whether we need to reprogram the remotes.
• Control board replacement (aftermarket): $285 – $425.
• Control board replacement (OEM FAAC): $475 – $750, depending on the model and current availability.
• Full motor replacement on a 750/760 hydraulic unit: $900 – $1,600 installed, OEM vs aftermarket being the main variable.

What moves the price? Parts type (OEM or aftermarket), accessibility of the operator, and whether the gate needs additional safety sensor work to pass final testing. Every estimate is free, and every price is in writing before we touch the gate. Call (850) 821-3781 and we’ll give you exact numbers for your specific FAAC model.

Why Miami Homeowners Call Calder Gate Repair Miami for FAAC Work

We’re the gate repair specialists inside the Relay Home Co. family, and we’ve been at this since 2009. Here’s what that means for you: a live person answers the phone at 3 a.m. if that’s when your gate dies. Our techs arrive in uniform, background-checked, and they send you a live tracking link so you’re not staring out the window waiting for a vague four-hour window.

On FAAC systems specifically, our technicians know the difference between a 412 board failure and a 400 motor capacitor issue before they open the housing. That first-visit diagnosis matters. It means fewer return trips and fewer dollars spent on parts you didn’t need.

And if your system genuinely isn’t repairable, or you’re replacing a residential FAAC with something different, we service the other brands Miami homes run too: LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. Same crew, same written-price standard.

Nico Alvarez leads our Miami crew, and he’s been working on gate operators since his days at LA Trade-Tech. Ask the technician who shows up about Miami salt corrosion on FAAC circuit boards, and you’ll get a straight answer with a clear price. No upsell, no replacement push. Just the repair, done right, covered for a full year.

FAQs